InnoCigs SMOK GX 2/4 Set Manuel D'utilisation page 72

STEAMAX GX2/4 – COMMISSIONING OF THE DEVICE
Changing the Atomizer Head
1. Remove the TFV8 Big Baby clearomizer from the battery of your e-cigarette.
2. Screw the head base counterclockwise from the glass tank.
3. Remove the old atomizer head and insert a new one. Please first drip a few
drops of e-liquid directly into the wick of the coil to make it fully saturated
before first use.
4. Connect all parts again and screw the clearomizer back to the battery / box
mod. Make sure that no e-liquid can overflow and / or leak.
Please note the following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping. Please take
several puffs without activating the atomizer and leave the atomizer head sit for 15 minutes in the e-liquid filled
tank before use. Don't clean atomizer heads with water. Because atomizer coils are wearing parts, they must be
changed regularly.
70
www.steamax.com