Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1) The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy
consumption and the programme duration.
2) This programme has a high temperature rinsing phase for better hygiene results. During
the rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
3) This is the most silent washing programme. The pump works at a very low speed to
decrease the level of noise. Because of the low speed, the programme duration is long.
4) With this programme you can wash a load with fresh soil. It gives good washing results
in a short time.
5) With this programme you have the most efficient use of water and energy consumption
for crockery and cutlery with normal soil. (This is the standard programme for test
institutes).
Consumption values
Programme
1
2
3
4
5
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
1)
Duration
(min)
40 - 150
150 - 160
200 - 220
30
160 - 180
Energy
(kWh)
0.6 - 1.4
1.4 - 1.6
1.1 - 1.2
0.8
0.8 - 0.9
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
ENGLISH
23
Water
(l)
7 - 14
13 - 15
9 - 11
9
9 - 10

Publicité

Table des Matières
loading

Table des Matières