Test The Installation - HP Scanjet 7000 Guide De Démarrage Rapide

Chapter 1
7. Press the Tools ( ) button to open the HP Scanner Tools Utility. Click the
Maintenance tab.
8. Click the Clean button to feed the cloth through the scanner.
NOTE: If the cleaning cloth does not run through the paper path and land in the
output tray, then the scanner installation may not be complete. See "Installation
troubleshooting" on page 18.
9. Repeat Step 8 at least once.
CAUTION: Wait two minutes for the components to dry before inserting paper
into the document feeder.

Test the installation

CAUTION: Before placing an item in the document feeder, make sure that the item
does not contain wet glue, correction fluid, or other substances that can be transferred
to the interior of the scanner.
Make sure there are no curls, wrinkles, staples, paper clips, or any other attached
material. Sheets should not be stuck together.
1. Place a single page in the document feeder. The page should be face down, with the
top of the page pointing down ( ).
6 HP Scanjet 7000/5000 Scanner