1
Scanner setup
Follow these steps to set up the scanner.
Check the box contents
Unpack the scanner hardware. Be sure to remove any shipping tape.
NOTE: The contents of the box, including the number of scanning software CDs,
can vary by country/region.
1
3
1
HP Scanjet 7000 or 5000 scanner
2
Output tray
3
Power supply
4
USB cable
5
Getting Started Guide (this book)
6
Paper-path cleaning cloth
7
Scanning software CDs
NOTE: In some countries/regions, you may need to install a feed roller (see "Install
the feed roller" on page 3).
Install the software
CAUTION: Do not connect the USB cable until you are prompted during the software
installation.
2
HP Scanjet 7000/5000 Scanner
2
4
6
5
7