HP Scanjet 7000 Guide De Démarrage Rapide page 17

4. Align the edges of the documents by tapping the bottom of the stack against the table
top. Rotate the stack 90 degrees and repeat.
5. Gently set the stack in the document feeder. Load the pages face down with the top
of the pages pointing into the feeder.
NOTE: For best results, do not drop the stack into the feeder and do not tap the
top edge of the stack after you have placed it in the document feeder.
6. Verify that the paper guides are aligned with the edges of the stack.
Load cards
To load cards into the document feeder, follow these steps:
Load originals 13