When Connecting To Separately Sold Power Amp - Pioneer DVH-330UB Manuel D'installation

Section
01
Connections

When connecting to separately sold power amp

This product Rear output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (5*)
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO
connector will differ depends on
the type of vehicle. Connect 5*
and 6* when Pin 5 is an antenna
control type. In another type of
vehicle, never connect 5* and 6*.
6
En
Connect with RCA cables
(sold separately)
Power amp (sold
separately)
System remote control
Rear speaker Rear speaker
 
 
Perform these connections when
using the optional amplifier.
Connections
When using a display connected to video outputs
WARNING
Never install the display in a location where it is
visible to the driver while driving.
Video output
This product
Display with RCA
input jacks
(sold separately)
To video input
RCA cable
(sold separately)
En
Section
01
7