Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting a device that supports high bandwidth video formats
When you use high bandwidth video formats such as 4K/60p YCbCr 4:4:4/YCbCr 4:2:2/
RGB 4:4:4 or 4K/60p YCbCr 4:2:0 Deep Color (Deep Colour) (10 bit or 12 bit), be sure to set
[HDMI Signal Format].
1
Select [Setup] - [HDMI Setup] - [HDMI Signal Format] from the home menu.
2
Select the HDMI input you want to apply the setting.
3
Select [Enhanced format].
Notes
• For details on the high bandwidth video format, refer to the Help Guide.
• When [Enhanced format] is selected, we recommend to use a Premium High Speed HDMI Cable with
Ethernet, which can support bandwidth up to 18 Gbps.
• When [Enhanced format] is selected, some devices (cable box or satellite box, Blu-ray Disc player, and
DVD player) may not work. In this case, select [Standard format].
• If your TV have similar menu for high bandwidth video format, check the setting on the TV menu when
you select [Enhanced format] on this receiver. For details on the TV menu setting, refer to the operating
instructions of the TV.
Making a connection for PoE (Power over Ethernet)
The following illustration is an example of configuration of a home network with the receiver
and a computer.
Computer
Notes
• Connect a router to one of ports 1 to 8 on the receiver using a single LAN cable. Do not connect the
same router to the receiver using more than one LAN cable. Doing so may cause a malfunction.
• Ports No. 1 and No. 2 support PoE (Power over Ethernet, Alternative A). If you connect a PoE-compatible
device to one of these ports, power will be supplied to the device from the receiver.
• You can also connect a device that does not support PoE to the PoE port.
• The PoE port lights in red while supplying power.
• This receiver supports PoE Class 3.
LAN cable
LAN cable
LAN cable
LAN cable
Wireless access point, etc.
Network camera, etc.
Internet
Modem
Router
11
GB
Publicité
Chapitres
Table des Matières
