Additional Settings (Option); Resetting The Adjustments (Reset) - Sony GDM-5502 Mode D'emploi

Additional settings (OPTION)

You can lock the controls, change the on-screen language, change
the menu position, and set the COLOR mode.
1
Press the MENU/OK button.
The menu appears on the screen.
2
Press the m/M buttons to highlight
press the MENU/OK button.
The OPTION menu appears on the screen.
3
Press the m/M buttons to select the desired
adjustment item.
Adjust the selected item according to the following
instructions.
x Locking the controls (CONTROL LOCK)
You can protect the adjustment data by locking the controls.
Press the m/M buttons to highlight
LOCK) and press the MENU/OK button. Then press the
m/M buttons to select ON and press the MENU/OK
button.
Only the ! (power) switch, MENU/OK button, INPUT switch,
, and (CONTROL LOCK) of the
operate. If any other items are selected, the
the screen.
To cancel the control lock
Repeat the procedure above and set
x Changing the on-screen language
(LANGUAGE)
See page 8.
x Changing the menu's position
(OSD POSITION)
Change the menu's position if it is blocking an image on the
screen.
Press the m/M buttons to select
horizontal adjustment, or
vertical adjustment and press the MENU/OK button.
Then press the –/+ button to shift the on-screen menu.
x Setting the COLOR mode
See page 14.
16
OPTION and
(CONTROL
OPTION menu will
mark appears on
(CONTROL LOCK) to OFF.
(OSD POSITION) for
(OSD POSITION) for

Resetting the adjustments (RESET)

This monitor has the following 2 reset methods.
x Resetting all the adjustment data for the
current input signal
1
Press the MENU/OK button.
The menu appears on the screen.
2
Press the m/M buttons to highlight 0 RESET and
press the MENU/OK button.
3
Press the m/M buttons to select 01 and press the
MENU/OK button.
4
Press the m/M buttons to select OK. Then press the
MENU/OK button.
RESET
1
2
1 6 0 0 x 1 2 0 0 / 8 5 H z
Note that the following items are not reset by this method:
• on-screen menu language (page 8)
• color mode setting in the OPTION menu (PRESET,
VARIABLE, EXPERT, sRGB) (page 14)
• color temperature setting in the PRESET mode (9300K,
6500K, 5000K) (page 15)
• on-screen menu position (page 16)
x Resetting all of the adjustment data for all
input signals
Select 02 in step 3 above.
Note
The RESET function does not function when
is set to ON.
CURRENT
MODE
OK
CANCEL
(CONTROL LOCK)