Sony GDM-5502 Mode D'emploi page 15

x EXPERT mode
You can make additional adjustments to the color in greater detail
by selecting the EXPERT mode.
1
Press the MENU/OK button.
The menu appears on the screen.
2
Press the m/M buttons to highlight
press the MENU/OK button.
The COLOR menu appears on the screen.
COLOR
R
G
B
R
G
B
1 6 0 0 x 1 2 0 0 / 8 5 H z
3
Press the m/M buttons to select the R (red), G
(green), and B (blue) component of input signal for
each of GAIN (6) and BIAS (
button to make the adjustment.
If you want to reset the EXPERT adjustments, select
0 (RESET) in COLOR menu. Then select OK in the RESET
window.
x sRGB mode
The sRGB color setting is an industry standard color space
protocol designed to correlate the displayed and printed colors of
sRGB compliant computer products. To adjust the colors to the
sRGB profile, simply select the sRGB mode in the COLOR
MODE ( ) menu of the OPTION (
However, in order to display the sRGB colors correctly (γ = 2.2,
6500K), you must set your computer to the sRGB profile. If you
select this mode, you cannot operate the CONTRAST/BRIGHT
menu adjustments.
COLOR
s
1 6 0 0 x 1 2 0 0 / 8 5 H z
Note
Your computer must be sRGB compliant.
COLOR and
: EXPERT
45
). Then press the –/+
) menu.
: s RGB
RGB
: /
Restoring the color from the EASY, PRESET, or
sRGB modes (COLOR RETURN)
The colors of most display monitors tend to gradually change
brilliance over several years of service. The COLOR RETURN
feature found in the PRESET, VARIABLE and sRGB modes
allows you to restore the color to the original factory quality
levels. The explanation below explains how to restore the
monitor's color from the PRESET mode for example.
First, select the PRESET, VARIABLE or sRGB mode in the
OPTION menu (page 14).
1
Press the MENU/OK button.
The menu appears on the screen.
2
Press the m/M buttons to highlight
press the MENU/OK button.
The COLOR menu appears on the screen.
3
Press the m/M buttons to highlight
RETURN. Then press the MENU/OK button.
4
Press the m/M buttons to select OK. Then press the
MENU/OK button.
COLOR
COLOR
RETURN
1 6 0 0 x 1 2 0 0 / 8 5 H z
The picture disappears while the color is being restored (about
2 seconds). After the color is restored, the picture reappears
on the screen again.
Notes
• Before using this feature, the monitor must be in normal operation
mode (green power indicator on) for at least 30 minutes. If the monitor
goes into power saving mode, you must return the monitor to normal
operation mode and wait for 30 minutes for the monitor to be ready.
You may need to adjust your computer's power saving settings to keep
the monitor in normal operation mode for the full 30 minutes. If the
monitor is not ready, the following message will appear.
COLOR
COLOR
RETURN
1 6 0 0 x 1 2 0 0 / 8 5 H z
• The monitor may gradually lose its ability to perform this function due
to the natural aging of the picture tube.
COLOR and
COLOR
: PRESET
OK
CANCEL
: PRESET
AVA I LABLE
AFTER
WARM UP
15
GB