Adjusting The Brightness And Contrast (Contrast/Bright) - Sony GDM-5502 Mode D'emploi

x Using the MENU/OK,
1
Display the menu.
Press the MENU/OK button to display the menu on the
screen.
MENU
2
Select the menu you want to adjust.
Highlight the desired menu by pressing the m/M buttons.
Then press the MENU/OK button.
3
Adjust the menu.
Press the –/+ buttons to make the adjustment and press the
MENU/OK button.
If you want to select another menu;
move the m/M buttons to select
button to exit the menu.
4
Close the menu.
Each time you select and the MENU/OK button, the menu
closes. If no buttons are pressed, the menu closes
automatically after about 30 seconds.
MENU
10
and –/+ buttons
m/M
OK
MENU
b
OK
and press the MENU/OK
MENU
b
OK
OK
Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected input connector.
1
Press 6 (contrast) /m or
The CONTRAST/BRIGHT menu appears on the screen.
2
Press the –/+ buttons to adjust the contrast (6) or
brightness ( ).
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE (
OPTION ( ) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
CONTRAST /
1 6 0 0 x 1 2 0 0 / 8 5 H z
You cannot adjust the contrast (6) or brightness (
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE ( ) of the OPTION (
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 14.
(brightness) /M button.
) of the
BR GHT I
s RGB
: /
) on this
) menu.