Camera Module Adjustment; Fokus- Und Zoomeinstellung - Abus TVCC35000 Mode D'emploi

6.3 Camera module adjustment

The camera module can be adjusted in 3 axis. The adjustment of the third axis often will be used on
wall mount of the camera. The module rotation (1
360 degree.
Pan (1st axis)

6.4 Fokus- und Zoomeinstellung

The cameras TVCC35010 and TVCC35510 are
equipped with a vario focal lens. On the bottom side of
the lens two adjustment handles for focus and zoom
ratio are positioned. The handles additionally act as a
fixing screw for the focus and zoom adjustment.
The fixing handles can be rotated anti-clockwise for defixing. Please perfom this with care to
prevent the handles falling off the lens. Now please adjust zoom ratio and focus. Afterwards fix the
handles by rotating clockwise.
Function
Zoom ratio adjustment
Focus adjustment
Tilt (2nd axis)
Description / Option
WIDE – Viewing angle wide, Zoom 0x (max.)
TELE – Viewing angle narrow, Zoom 3.75x (max.)
FAR – Focus far
NEAR – Focus near
st rd
and 3 axis) must not be performed more than
23
Rotation (3rd axis)