Operation; Before Initial Use - Dometic COOLFREEZE CFX75DZW Notice D'utilisation

Operation

7 Operation
7.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 24).
Reversing the lid opening direction
The lid hinges can be moved to the opposite side if you want to open the lids from
the opposite direction. To do this, proceed as follows:
➤ Open the lids and remove them (fig. 5 A, page 4).
➤ Remove three screws per side hinge (fig. 5 B, page 4) and take off hinges.
➤ Remove plastic covers from new side hinge positions with a small screwdriver
and re-fit to old hinge positions.
➤ Re-fit side hinges in new positions.
➤ Remove two plastic covers from the centre hinge (fig. 6 A, page 5).
➤ Remove four screws from the centre hinge (fig. 6 B, page 5) and take off the
hinge.
➤ Remove the plastic cover from new centre hinge position with a small
screwdriver and re-fit to old hinge position (fig. 6 C, page 5).
➤ Re-fit centre hinge in new position.
➤ Insert the lids in the hinges on the opposite side (fig. 6 D, page 5).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 3) three times.
➤ Use the "UP +" (fig. 3 10, page 3) or "DOWN –" (fig. 3 9, page 3) buttons to
select Celsius or Fahrenheit.
✓ The selected temperature units then appear in both displays for a few seconds.
The displays flash several times before returning to the current temperature.
14
CFX75DZW, CFX95DZW
EN