Technical Information - AEG FSE63307P Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
Limescale deposits on the ta-
bleware, on the tub and on
the inside of the door.
Dull, discoloured or chipped
tableware.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.

12. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to
decrease energy consumption.
Possible cause and solution
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Use salt and set regeneration of the water softener
even when multi-functional tablets are used. Refer to
"The water softener".
• Start the Machine Care programme with a descaler
designed for dishwashers.
• If limescale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
• Try a different detergent.
• Contact the detergent manufacturer.
• Make sure that only dishwasher-safe items are washed
in the appliance.
• Load and unload the basket carefully. Refer to the bas-
ket loading leaflet.
• Place delicate items in the upper basket.
• Activate the GlassCare option to ensure special care
for glassware and delicate items.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
bar (minimum and maximum)
MPa (minimum and maximum)
Cold water or hot water
Place settings
Left-on mode (W)
Off-mode (W)
546 / 759 / 550
220 - 240
50
0.5 - 8
0.05 - 0.8
max 60 °C
2)
12
5.0
0.50
ENGLISH
25

Publicité

Chapitres

Table des Matières
loading

Table des Matières