hergom C-12 Instructions D'installation, De Service Et D'entretien page 21

2 - REMOVING THE FAN
ATTENTION! Before working on electrical parts
be sure the appliance has been disconnected
from the mains.
In order to replace the fans, observe the following
instructions:
1. Open the door of the ash pan and remove the
fan grilles, which are fixed with two screws
(Fig. 1)
2. Loosen the 2 bottom screws that secure the
fan assembly and remove it from its housing
by pulling gently outward, then disconnect
the two faston terminals and remove the fan.
(Fig. 2)
3. Replace the damaged fan and install the new
fan assembly by performing the above steps in
reverse order.
FIG. 1
FIG. 2