Philips Azur GC4400 Série Mode D'emploi page 12

EnGlish
12
automatic shut-off function (specific types only)
The automatic shut-off function automatically switches off the iron if it
has not been moved for a while.
The red AUTO/OFF indication of the temperature light flashes to
,
indicate that the iron has been switched off by the automatic shut-
off function.
To let the iron heat up again:
1 Pick up the iron or move it slightly.
The red AUTO/OFF indication goes out.
,
If the temperature of the soleplate has dropped below the set
,
ironing temperature, the amber temperature light goes on.
2 If the amber temperature light goes on after you have moved the
iron, wait for it to go out before you start ironing.
Note: If the amber temperature light does not go on after you move the iron,
the soleplate still has the right temperature and the iron is ready for use.
Delicate fabric protector (specific types only)
The delicate fabric protector protects delicate fabrics from heat damage
and shiny patches.
With the delicate fabric protector you can iron delicate fabrics (silk, wool
and nylon) at temperature settings 3 to MAX in combination with all
steam functions available on the iron.
The delicate fabric protector reduces the soleplate temperature instantly,
thus allowing you to iron delicate fabrics safely.
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that is
not visible when you wear or use the article.
1 Put the iron on the delicate fabric protector ('click') (Fig. 13).
Cleaning and maintenance
Cleaning
1 Wipe flakes and any other deposits off the soleplate with a damp
cloth and a non-abrasive (liquid) cleaning agent.
4239.000.6215.6.indd 12 23-10-09 10:05