Preparations; Using The Av Cordless Ir System - Laser Link - Sony CPJ-A300 Mode D'emploi

Preparations

Tip
This projector accepts
the video signals of
both NTSC and PAL
color systems.
Notes
• Turn off the video
equipment and the
projector before
connecting.
• Refer to the video
equipment's manual
as well.
• To connect the IR
transmitter to a wall
outlet use only
supplied AC power
adapter, because the
polarity of the
supplied adapter is
opposite of
conventional
adapters. Do not use
the supplied AC
power adapter for
other electric
appliances with a DC
IN 9 V jack.
Polarity of the plug
There are two ways to receive picture and sound to
be projected from video equipment: by AV Cordless
IR (infrared rays) system or by directly connecting
video equipment.
Using the AV Cordless IR system –
LASER LINK
Connect the supplied IR transmitter to video
equipment such as a VCR or video camera recorder
using the supplied A/V connecting cable.
Connect the supplied AC power adapter to DC IN
9V of the IR transmitter and to a wall outlet.
You do not need to connect the projector itself to
video equipment.
VIDEO
L
AUDIO
R
to AUDIO OUT
A/V connecting cable (supplied)
to a wall outlet
: Signal flow
IR transmitter
to VIDEO OUT
to
AUDIO IN
AC power adapter
(supplied)
to
DC IN 9V
to
VIDEO IN
Preparations 7
-EN