9.3
Alarm tone on/off
Fig. 10: Alarm tone off
Preset: Mute ON (warning signal switched off)
Mute ON = Alarm tone off
Mute OFF = Alarm tone on
Press the ●-key until the selection ON or OFF
•
flashes.
When the alarm sound is switched off, a crossed-
out loudspeaker symbol appears in the display.
NOTE!
The alarm tone can be stopped by pressing any
button. In this case, the alarm tone sounds again
after the alarm threshold is exceeded again.
You will then be taken to the display for setting the
traffic light LED.
Table des matières
47
EN