Bosch BSG7 Série Notice D'utilisation page 39

en
Congratulations on your purchase of a Bosch BSG7
vacuum cleaner.
This instruction manual describes various BSG7
models, which means that some of the equipment
features and functions described may not be available
on your model.
You should only use original Bosch accessories, which
have been specially developed for your vacuum cleaner
to achieve the best possible vacuuming results.
Fold out picture pages.
Before using for the first time
1*
Figure
Push the handle onto the flexible hose until it engages.
Setting up
2
Figure
a) Push the flexible hose adapter into the opening on the
vacuum cleaner until it engages.
b To remove the flexible hose, press the release button and
pull the hose out.
3*
Figure
a) Connect the handle and the telescopic tube together.
b) Push the handle into the telescopic tube until it engages.
To release the connection, squeeze the locking collar and
pull the telescopic tube out.
4*
Figure
a) Connect the floor tool and the telescopic tube together.
b) Push the telescopic tube straight into the
connecting piece of the floor tool until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
5*
Figure
To adjust the length of the telescopic tube, adjust the
adjusting sleeve/sliding switch in the direction of the
arrow and adjust the tube to the required length.
6
Figure
Take the mains plug, pull the mains cable to the required
length and insert the plug into a socket.
38
7
Figure
a) Press the ON/OFF button in the direction of the arrow to
switch your vacuum cleaner on.
b) The button can also be applied using the swing handle.
Vacuuming
8
Figure
The required suction power can be selected infinitely
variably by adjusting the slide control.
Lowest
suction range:
For vacuuming delicate fabrics, e.g. curtains.
Low
suction range:
For daily vacuuming of lightly soiled floors.
Medium
suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.
High
suction range:
For vacuuming stubborn dirt and very heavily soiled
surfaces.
9
Figure
Adjusting the floor tool:
a) For vacuuming rugs
and carpets
b For vacuuming
hard floors
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual for
notes on its use and maintenance.
10*
Figure
Vacuuming with accessories
(attach to handle or suction pipe as required).
a) Crevice nozzle
For cleaning crevices and corners.
b) Upholstery nozzle
For cleaning upholstered furniture,
curtains, etc.
c) Hard furnishings brush
For vacuuming picture frames, books, furniture requiring
particular care, etc.
=>
=>