Télécharger Imprimer la page

BERNSTEIN SRF Série Instructions De Service Et De Montage page 26

Publicité

11
Instandhaltung / Wartung/
Maintenance / Service/
Entretien / Maintenance
Verunreinigungen durch metallhaltige Stoffe müssen entfernt
werden, ansonsten verringert sich der Schaltabstand.
Der SRF ist wartungsfrei.
Keine alkoholischen Reinigungsmittel verwenden.
Für einen störungsfreien und langlebigen Betrieb bitte
regelmäßig überprüfen:
fester Sitz aller Komponenten
sichere Schaltfunktion
bei Beschädigungen entsprechende Komponenten
austauschen
Vorschriften abhängig von der Ausführung
Standards depending on the version
Directives selon la version
EN 60947-1, EN 60947-5-2, EN 61326-3-1
EN ISO 13849-1, EN 62061, EN 60947-5-3, EN ISO 13849-2
EN 60204-1, ETSI EN 301489-1, ETSI EN 300330-1
Richtlinie
Directive
Diréctive
2006/42/EG (Maschinenrichtlinie / Safety-of-Machinery-Directive /
Diréctive de sécurité des machines)
2014/53/EU (RED)
2011/65/EU (RoHS II)
2014/30/EU (EMV / EMC / Directive Compatibilité Électromagnétique)
2012/19/EU (EU-WEEE II)
EU-Konformität
EU-Conformity
Conformité CE
Betriebs- und Montageanleitung / Installation and Operating Instructions / Instructions de service et de montage
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Contamination by metal-based materials must be removed.
If not, the switch distance will be reduced.
Do not use alcoholic cleaning agents.
The SRF is maintenance-free.
For long-term and trouble-free operation, please
periodically check the following points:
solid fit of all components
reliable switching function
if damage occurs, please exchange the relevant
components
Zulassungen /
Approvals /
Homologations
TÜV Nord, cCSAus (class 2 Power source)
FCC ID: 2ABA6SRF
IC: 11535A-SRF
FCC/IC Requirements:
This device complies with Industry Canada licence-exempt RSS standard(s) and part 15
of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement
BERNSTEIN-Dok.: 0800000848 / Stand: 8 / 2019-07-29 / 0361-19
Des impuretés qui se cachent dans les matières métallifères
doivent être enlevées. Sinon, les distances de détection
diminuent. N'utilisez pas de produits détergents à base
d'alcools.
Le SRF ne requiert pas de maintenance.
Pour la longévité du produit, merci de vérifier régulièrement
les point suivants :
fixation de tous les composants
fonction de commutation sûre
en cas de dommage, veuillez changer les composants
correspondants
Seite 26 von 32
Seite 26 von 32

Publicité

loading

Ce manuel est également adapté pour:

Srf-2/4/3-a2,2-hSrf-2/4/3-e3-hSrf-0Srf-0-r18Srf di6-c-0/1-t