Mennekes AMEDIO Professional+ 22 Manuel D'utilisation page 65

Structure of the web interface
1
2
5
Fig. 22: Structure of the web interface
1. Menu
2. Parameter
3. Setting / Status
4. Comments / Information
5. Buttons for saving, restarting and loading presets
The following menus are displayed in the web interface:
„ "State"
„ "Settings"
„ "> Default"
„ "Operator"
„ "System"
„ "Documentation"
"State" menu
Here you cannot make any settings. Status information of
the device is displayed, e.g.
„ Current state
„ Fault messages
„ Configuration, e.g. LED colour scheme (green / blue)
„ Backend-System
3 4
"Settings" menu
Basic settings can be made here, e.g.
„ Connection to a Backend-System
„ Maximum charging current
If necessary the presets defined in the menu "> Default"
can be restored through the button "Settings Default &
Restart".
"> Default" menu
This is where presets for the "Settings" menu can be
defined.
"Operator" menu
This is where all advanced settings for setting up the
device can be made, e.g.
„ Connection to a Backend-System
"System" menu
Here you cannot make any settings. Information concern-
ing the firmware version and the system are displayed. A
firmware update can be executed here.
"Documentation" menu
Here you cannot make any settings. The interface docu-
mentation and error messages are described.
EN
21