Ac Power Connection - Sharp HT-SB300 Mode D'emploi

AC power connection

HT-SB300
ENGLISH After checking all the connections have been made correctly,
connect the AC power lead to the AC power input socket, then
to the Wall socket.
Using with the AC/DC adaptor
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC IN socket
on the speaker.
3
Plug the AC power lead into an Wall socket. The
STAND-BY indicator will turn RED when AC power is
applied. The power indicator will turn GREEN when
the system in "ON".
E-13
HT-SB300_A6_EN_UK.fm 2009 February 10
AC/DC Adaptor Cable
DC IN socket
(DC 12 V)
AC power lead
Wall socket
(AC 100 - 240 V ~ 50/60 Hz)
3
Notes:
Unplug the AC/DC adaptor from the Wall socket if the
speaker will not be used for a long period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
2
RIGHT LEFT
LINE IN 2 LINE IN 1
1
AC/DC Adaptor