Table des Matières
Publicité
Speaker connections to TVs (continued)
HT-SB300
Connecting to a TV
ENGLISH
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the speaker.
To select LINE IN 1 function:
On speaker: Press FUNCTION button repeatedly until "L1" is
displayed.
On remote control: Press LINE button repeatedly until "L1" is
displayed.
E-11
HT-SB300_A6_EN_UK.fm
TV
To audio output sockets
RCA cable (supplied)
Speaker
RIGHT
LEFT
LINE IN 2
LINE IN 1
2009 February 10
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the LINE
IN 2 socket on the rear of the speaker.
To select LINE IN 2 function:
On speaker: Press FUNCTION button repeatedly until "L2" is
displayed.
On remote control: Press LINE button repeatedly until "L2" is
displayed.
To LINE IN 1
sockets
Notes:
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
speaker will mute and recover after 3 seconds.
TV
To HEADPHONE socket
Audio cable (not supplied)
Speaker
LINE IN 2
HEADPHONE
To AUDIO LINE
IN 2 socket
RIGHT
LEFT
LINE IN 1
Publicité
Table des Matières
