auna 10032586 Mode D'emploi page 68

EN
68
5. To temporarily switch off alarm, press SCROLL/SELECT knob repeatedly
to set snooze time for 5, 10, 15 or 30 minutes in turn. The set snooze time
will show on the display and unit will go to standby.
6. To turn off alarm, press /POWER button when the alarm sounds.
7. To cancel Alarm, refer to steps 1-3 to enable alarm "Off".
Setting Equaliser
This feature enables you to choose a sound equalization profile. Each of
the equalization settings will change the tone of the sound from your radio
when selected.
1. Press MENU button - Main menu - System settings - Equaliser, and then
press SCROLL/ SELECT knob to confirm.
2. Turn SCROLL/SELECT knob and then press it to select a profile through
Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News and My EQ.
3. To set up My EQ, select "My EQ profile setup," and then press SCROLL/
SELECT knob to confirm. Turn SCROLL/SELECT knob to select Bass,
Treble or Loudness, and then press SCROLL/SELECT knob to confirm.
Turn SCROLL/SELECT knob to change the value of Bass, Treble or
Loudness, and then press SCROLL/SELECT knob to confirm. Press BACK
button, display will show "Save changes". Turn and press SCROLL/
SELECT knob to select "YES" to save changes.
Network setup
Users encountering networking issues may find these options useful for
diagnosing and fixing network problems.
1. Press MENU button - Main menu - System settings - Network, press
SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select your preferred network setting
option.
Network wizard
PBC WLAN setup
View settings
Manual settings
Network profile
Keep network connected
3. Press SCROLL/SELECT knob to confirm your setting.
Scan for available networks
Set up a WPS encrypted network (only
support the router uses WPS 2.0)
View network settings such as MAC
address, WLAN region, IP address etc.
Set wireless connection
List of registered networks or delete
some of unwanted networks
Keep network connected in DAB, FM, BT,
AUX IN and standby mode