Before First Use - AEG RMB46211NX Notice D'utilisation

BEFORE FIRST USE

INSTALLING WATER LINE
1. For models with Automatic Ice
Maker
– The water pressure should be
2.0~12.5 kgf/cm2 or more to run
the Automatic Ice Maker.
– Check your tap water pressure.
If a cup of 180 cc is full within
10 seconds, the pressure is
appropriate.
– If the water pressure is not high
enough to run the Automatic Ice
Maker, call the local plumber to
get an additional water pressure
pump.
2. When installing the water tubes,
ensure they are not close to any
hot surfaces.
3. The water filter only "filters" water.
It does not eliminate any bacteria
or microbes.
4. The filter life depends on the
amount of use. We recommend
you replace the filter at least once
every 6 months. When attaching the
filter, place it for an easy access (to
remove and replace) .
Note: After 6 months of first
power input, icon is flickering.
To eliminate the icon flickering,
press the light button for
3 seconds after exchanging
the water filter.
5. After installing refrigerator and
water line system, select WATER
on your control panel and press it
for 2–3 minutes to supply water into
the water tank and dispense water.
AEG_CZ_NL_EN_ET_FR_DE_EL_HU_LV_RO.indd 59
ENGLISH 59
10-07-2020 07:31:29 PM