Setting The Service Counter - Intermatic Grasslin CE2 Mode D'emploi

Setting the service counter

In the menu, you can set the number of operating hours that pass before a service message is
Service
displayed for a channel. The relevant message then appears on the device display.
You can go back a step at any time by pressing
Fig. 14: Setting the service counter
1. Press the
Menu
2. Select
Hour counter
3. Select
Service
4. Select the desired channel and confirm with
5. Set the interval (+/-) and confirm with
button.
and confirm with
and confirm with .
OK
.
OK
.
ESC
.
OK
.
OK
EN
48