Panasonic Lumix DMW-BTC12 Manuel D'utilisation page 9

For the DMW-BTC12
3 Insert the battery in the correct direction.
• The [CHARGE] indicator E lights up and charging begins.
DMW-BLH7/DMW-BLG10
F Battery
For the DMW-BTC13
3 Attach the battery by paying attention to
its direction, then slide the battery in until
it is secure.
• The [CHARGE] indicator H lights up and charging
begins.
∫ About the [CHARGE] indicator
The [CHARGE] indicator turns on:
The [CHARGE] indicator is turned on during charging.
The [CHARGE] indicator turns off:
The [CHARGE] indicator will turn off once the charging has completed
without any problem. (After charging is complete, disconnect the AC adaptor
(supplied) from the power outlet and remove the battery.)
≥ When the [CHARGE] indicator flashes
• The battery temperature is too high or too low. It is recommended to charge the battery
again in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF).
• The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
∫ Removing the battery
To remove the battery, follow the steps for inserting it in the reverse order.



DMW-BLC12


G Insert correctly

(ENG) DVQX1351
9