Symbols Used In The Manual; Main Machine Components; Purpose And Content Of The Manual; Target Group - TMB P711D EU Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

are shown as reference only and are not binding as to the actual design and/or equipment.

SYMBOLS USED IN THE MANUAL

Open book symbol with an "i":
Indicates the need to consult the instruction manual.
Open book symbol:
Tells the operator to read the manual before using the appliance.
Covered place symbol:
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
Warning symbol:
Symbol indicating the compulsory use of protective gloves:
Recycling symbol:
Disposal symbol:

MAIN MACHINE COMPONENTS

The main components of the appliance are:
1. Vacuum head.
2. Handle bar for vacuum head lifting.
3.
4.
5. Vacuum head unlocking hook.
6. Collection tank.
7. Handle for handling the collection tank.
8. Vacuum nozzle.
9. Button for releasing the vacuum nozzle catch.
10.
11.
12.
1
5
7
6
12
10

PURPOSE AND CONTENT OF THE MANUAL

2
3
11
7
9
8

STORING THE USE AND MAINTENANCE MANUAL

The Use and Maintenance Manual must be stored in its special pouch close to the appliance,

ON CONSIGNMENT OF THE MACHINE

When the machine is delivered to the customer, an immediate check must be performed to ensure all
equipment has not been damaged during transportation. If this is the case, the carrier must ascertain
claimed.

INTRODUCTORY COMMENT

TECHNICAL DESCRIPTION

only be used for this purpose.
ATTENTION: the appliance is not suitable for use in the rain, or under jets of water.
IT IS FORBIDDEN
in places with an explosive atmosphere. In addition, it is not suitable as a means of transport
for people or objects.
Operator cooperation is paramount for accident prevention. No accident prevention programme can

SERIAL NUMBER PLATE

The serial number plate is located at the rear of the vacuum cleaner, and indicates the general
or to purchase spare parts.
4

SYMBOLS USED ON THE APPLIANCE

Main switch symbol:

PREPARING THE APPLIANCE

PREPARING THE APPLIANCE
etc.
28 kg
18

TARGET GROUP

IDENTIFICATION DATA

The appliance must

INTENDED USE

SAFETY

A
55cm
B
67cm
C
104cm

Publicité

Table des Matières
loading

Table des Matières