Emptying The Collection Tank; At The End Of The Work; Maintenance; Troubleshooting - TMB P711D EU Manuel D'utilisation Et D'entretien

EMPTYING THE COLLECTION TANK

operations:
1.
N.B
regulations.
CAUTION: These operations must be carried out using gloves to protect the hands.
2.
3.
WARNING: To prevent damaging the power cable, disconnect the plug from the mains socket
4.
5.
Fig.4).
1
4
3
2
1
2
6.
CAUTION: When overturning the collection tank, hold the appliance using the handlebars (11).
7.
N.B. :
appliance.
N.B. :
N.B. :
Remove the discharge hose (12) from the catch of the collection tank (Fig.6).
•
the hose (Fig.7).
8.
8
9 10
4 5
13
7

AT THE END OF THE WORK

operations:
1.

MAINTENANCE".

2. Take the appliance to the designated machine storage place.
3.
ATTENTION:
there must be no objects that could either damage it, or be damaged through contact with it.
MAINTENANCE
1.
2.
Fig.1
3. Fig.2
Fig.3
N.B. :
ATTENTION:
clogged or if it is damaged replace it.
Fig.1).
Fig.2).
Fig.3
5
7
6
3
Fig.5).
11
12
6
").
").
1
2 4
3
1 2
4. Fig.4
N.B.:
N.B:
them.
ATTENTION:
clogged or if it is damaged replace it.
5.
6.
7.
8.
obstructions.
9.
10.
4 8
6
7
5

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
into the mains socket.
appliance do not match the electrical
The vacuum hose is not connected
collection tank.
The vacuum hose is not connected
being used.
The vacuum circuit
There is a blockage in the vacuum
DISPOSAL
To dispose of the appliance, take it to a demolition centre or an
authorised collection centre.
• Electric and electronic parts*
•
•
and electronic parts.
21
5
3
Fig.5).
9
SOLUTION
Connect the plug on the appliance's
Check that the technical data on the
appliance's serial number plate match
Contact a specialised technician
the nozzle on the collection tank.
is blocked
Remove the obstruction in
vacuum circuit.
Clear the obstruction in the vacuum
the