Symbols Used In The Manual; Main Machine Components; Purpose And Content Of The Manual; Target Group - TMB ATOM PLUS Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
The descriptions contained in this document are not binding. The company therefore
supply, as considered necessary for reasons of improvement or manufacturing/commercial
document is prohibited by law.
The images are shown as reference only and are not binding as to the actual design
and/or equipment.

SYMBOLS USED IN THE MANUAL

Open book symbol with an "i":
Indicates the need to consult the instruction manual.
Open book symbol:
Tells the operator to read the manual before using the appliance.
Covered place symbol:
the operations preceded by this symbol must always be carried out in a dry, covered
area.
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the
instructions indicated for the safety of the operator and the device.
Symbol indicating the compulsory use of protective gloves:
Indicates that the operator should always wear protective gloves, to avoid the risk of
serious injury to his hands from sharp objects.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental
regulations in force in the place where the appliance is being used.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the appliance.

PURPOSE AND CONTENT OF THE MANUAL

The aim of this manual is to provide customers with all the information needed to use the
appliance in the safest, most appropriate and most autonomous way. It includes information
concerning technical aspects, safety, operation, appliance downtime, maintenance, spare
manual carefully before carrying out any operation on the appliance. If in doubt about the
correct interpretation of instructions, contact your nearest Customer Service Centre to obtain

TARGET GROUP

technicians. The manufacturer is not liable for damages resulting from failure to comply with
this veto.

STORING THE USE AND MAINTENANCE MANUAL

The Use and Maintenance Manual must be stored in its special pouch close to the appliance,
protected from liquids and anything else that could compromise its legibility.

ON CONSIGNMENT OF THE MACHINE

When the machine is delivered to the customer, an immediate check must be performed to
ensure all the material mentioned in the shipping documents has been received, in addition to
verifying that the equipment has not been damaged during transportation. If this is the case,
compensation for damage successfully claimed.

INTRODUCTORY COMMENT

in full working order by performing the maintenance operations described in the attached
documentation. You should therefore read this instruction manual carefully, consulting it
again if issues arise while using the machine. If necessary, remember that our assistance
intervention.

IDENTIFICATION DATA

For technical assistance or to request replacement parts, always give the model, the version

TECHNICAL DESCRIPTION

The ATOM PLUS is wet and dry vacuum cleaners that, using the vacuum created inside the
collection tank by the fan driven by an electrical motor, can vacuum dust and dry solid object
up to 2cm in size and at room temperature, using the accessories in contact with the surface
purpose.
sectors, in proven safety conditions.
ATTENTION: the appliance is not suitable for use in the rain, or under jets of water.
IT IS FORBIDDEN
liquids in places with an explosive atmosphere. In addition, it is not suitable as a means
of transport for people or objects.
Operator cooperation is paramount for accident prevention. No accident prevention
machine operation. The majority of occupational accidents that happen either in the workplace
or whilst moving are caused by failure to respect the most basic safety rules. An attentive,
implement any prevention programme.

SERIAL NUMBER PLATE

The serial number plate is located at the rear of the vacuum cleaner, and indicates the general
characteristics of the appliance, in particular the appliance's serial number. The serial number
is a very important piece of information and should always be provided together with any
request for assistance or to purchase spare parts.
18
The appliance must only be used for this

INTENDED USE

SAFETY

Publicité

Table des Matières
loading

Table des Matières