Symbols Used On The Appliance; Preparing The Appliance; How To Unpack The Appliance; How To Transport The Appliance - TMB ATOM PLUS Manuel D'utilisation Et D'entretien

SYMBOLS USED ON THE APPLIANCE

Main switch symbol:
This is used on the back of the appliance to indicate the main switch.

PREPARING THE APPLIANCE

PREPARING THE APPLIANCE
not be left within the reach of children, disabled persons, etc.
Gross weight of device, including packaging, is:
PACKING
MODEL
WEIGHT
ATOM PLUS 8Kg
The packaging dimensions are as follows:
ATOM PLUS
A 40cm
B 39cm
C 50cm

HOW TO UNPACK THE APPLIANCE

The procedure for removing the device from its packaging is the following:
1.
2.
3. Take out the vacuum head carton.
4.
during the operation.
5. Take out the appliance from the protective bag using the relative handle, taking care not to
damage either.
N.B.: it is recommended that all the packaging components be kept for any future
transportation of the appliance.
CAUTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.

HOW TO TRANSPORT THE APPLIANCE

The procedure for the safe handling of the device is the following:
1.
SAFETY").
2.
3. Insert the appliance into the protective bag, taking care not to damage either during this
operation.
4. Insert the appliance into the carton, taking care not to damage either during this operation.
Remember to place at the bottom of the carton the block for the wheels of the appliance,
position around the collection tank the blocks for preventing damage during transportation.
5. Insert the accessories support and the head block inside the carton.
6. Place the accessories in the carton.
7. Close the carton.
N.B.: For transportation in vehicles, secure the device according to the regulations in
force so that it can not slide or tip over.
CAUTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
3
2
1
1
The stages for making the appliance safe, thereby making it possible to carry out operations
safely, are as follows:
1.
2.
3. Wind the power cable under the appliance's lifting handle.
CAUTION: We recommend handling the power cable with dry hands to avoid serious
injury.
CAUTION: To prevent damaging the power cable, disconnect the plug from the mains socket by
directly pulling the plug and not the cable.
1
1
1.
SAFETY").
2.
3.
4.
5.
6.
N.B.:
3
1
MACHINE
Fig.1).
19

APPLIANCE SAFETY

Fig.1).
Fig.2).
4
2
2 3

PREPARING TO WORK

INSERTING THE CARTRIDGE FILTER
Fig.2), before removing the head
Fig.1).
Fig.4).
2
7
1
6
4
2 4
MACHINE
Fig.3).