1- General Characteristics; 2- Frontal Panel - ITALFARAD IFC7 Notice D'utilisation

1. General characteristics
Digital power factor regulator with output relays for the connection and the
disconnection of capacitive banks.
Designed to obtain an optimal power factor in the plant and an equal wear of both
the capacitors and the switching contactors.
Microprocessor control circuit with high performances.
Accurate measuring system also in presence of harmonics.
Easy installation.
Easy setting and monitoring through the keyboard on board.
Dual auxiliary voltage supply 110-127/220-240VAC.
Measuring voltage input: any voltage from 80 to 500VAC.
Measuring current input: any standard C.T. with secondary 5A (1A on request).
Current measurement in true RMS, also in presence of harmonics.
Automatic intelligent regulation.
Adjustable sensitivity (time integral).
Same step reconnection delay (adjustable).
Equal use of the steps (automatic registering of the switching operations and the
working time of each step).
Line monitoring: cower factor, current, frequency.
2. Frontal panel
2 3
1
4
6
7 8 9 10 5
GB
ITALFARAD S.p .A. via IV novembre n.1 Minerbio (BO) It aly
17