Hewi 802 Série Mode D'emploi page 7

Proper use in accordance with Directive 93/42/EWG
HEWI hinged support rails have been designed for use
in bathrooms and toilets. They provide grip and support,
and assist the independent standing and sitting of per-
sons with and without physical impairment.
Warning
∙ The HEWI hinged support rails are designed for a
maximum static working load of 100 kg vertically.
∙ A certain amount of vertical sag under load is normal.
In case of damage, e.g. exceeding of the working
load, the hinged seat must no longer be used.
∙ Do not use the hinged seat for any purpose other
than that for which it is intended, e.g. do not use it as
gymnastics equipment or as a climbing aid or step.
∙ When the seat is folded down ensure that there is
no part of the body under the product.
∙ Improper installation/use can cause accidents and
injuries.
∙ Mounting only by persons familiar with mounting of
the product and appropriate qualifications for their
activity.
∙ The wall on which the produkt is to be installed must
be flat, firm and capable of taking the load. Only use
fixing materials approved by the wall anchor manu-
facturer for the intended purpose. In case of doubt,
contact HEWI's support tel. 0044 1634 258200 (UK),
0049 5691 82-0 (International).
∙ After installing the seat, perform a functional test.
∙ On acceptance the product must be checked for
damage; any defects must be reported immediately.
The product must be stored in a dry place and free
from pressure, e.g. no other items stacked on top
of it.
∙ The installer must pass on the installation and use
instructions to the user and they must be kept for
the whole life of the product.
∙ The toilet roll holder is not suitable as a carrying
handle for hinged support rails.
∙ The maximum static working load of hinged support
rails does not increase the because of the floor
support.
Montagehinweis | Mounting information | Consigne de montage | Montagetip
Indicazioni per il montaggio | Indicaciones de montaje | Wskazówki do montażu
Maintenance
The HEWI hinged support rail is not maintenance-free !
It must be checked monthly by qualified personnel to
ensure that it is in perfect working order. In case of
defects (e.g. braking force too small) the relevant steps
given in the installation and use instructions must be
taken.
Care and cleaning instructions
HEWI products are easy care and easy to clean.
Frequently, occasional wiping with a damp cloth
is sufficient. If using cleaning products the following
should be noted:
∙ Only use cleaning products with a pH value
between 6 and 8.
∙ Cleaning products that contain detergents such
as phosphates, soaps and tensides (surfactants)
as their active substances can be used.
∙ Please note and follow the cleaning product manu-
facturers' instructions (concentration, contact time).
∙ Do not use alkali, acidic or chlorine-based cleaning
products or cleaning products with scouring agent
additives.
∙ Do not use any scouring cleaning equipment, e.g.
brushes.
∙ Do not apply the cleaner directly to the surface,
but always pour it on the cleaning cloth instead.
Disclaimer
HEWI does not accept any liability whatsoever for
personal injuries or damage to property that is or
has been caused due to incorrect assembly, installa-
tion or use, especially due to disregard of the listed
warnings and safety instructions.
Disposal
Proper disposal is subject to the applicable national
statutory regulations.
HEWI | 7