Westfalia Automotive SIARR 315118600001 Notice De Montage page 2

SIARR
5408
PREPARATION
* Remove the 2 bolts under the bumper to facilitate fitting.
ASSEMBLY
* Fasten the right-hand arm B on the right-hand side-member
at points V and X with bolting kits V and X.
* Fasten the left-hand arm C on the left-hand side-member
at points V and X with bolting kits V and X.
* Fasten the coupling cross-member A to the right-hand and left-hand
arms at points W and Y with bolting kits W and Y (If necessary
insert the back plates between the arm B and cross-member A).
* Fit the head D on cross-member A at point Z with bolting kit Z.
* Fasten the ball joint on the head D at point U with bolting kit U.
FINISHING
* Tighten all of the nuts, bolts and screws to the torques indicated below.
* Refit the 2 bumper bolting bolts.
FASTENING KIT
2 HM10x35 screws
W 2 CS10 washers
2 10-27 plain washers
2 HM10 nuts
2 HM10x25 screws
V
2 CS10 washers
2 10-27 plain washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
4 HM10x25 screws
X
4 CS10 washers
4 10-27 plain washers
4 M10 cage nuts
2 HM10x25 screws
Y
2 CS10 washers
2 10-27 plain washers
2 HM12x60 screws
Z
2 CS12 washers
2 HM12 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
!
Affix the sticker in the position
Type Type
SI053 Approval No.
Tow bar for
Peugeot 207 SW e24*94/20*00*0084
(Long Detachable Ball Join)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM5000\NDM5408-B - FOLIO NDMANG
Max. Total Max. Total
Authori. Weight Towable Weight
1 758 kg 1 150 kg
315118600001
Fig. 1
Max. Verti- Value
cal load D
46 kg 6,42 kN