Sony XAV-W1 Mode D'emploi page 45

No Signal Setting
Shows the wallpaper
automatically when no
external video signal is
detected.
External Video Setting
Item
Input (page 51)
Activates the video input from
the connected back camera/
navigation device.
Color System (page 51)
Changes the color system
according to the connected
back camera/navigation
device.
(SECAM is not supported.)
Back Camera Setting
(page 52)
* When a device is connected to BUS CONTROL IN, "Sony BUS" appears instead of "AUX 3," and only options
"Video" and "Audio" are selectable.
Wallpaper (z) To show the wallpaper
automatically.
Blank Screen To show the no signal
(blank) screen.
Option Purpose
OFF (z) To deactivate the input.
Navigation
To show the picture from
the navigation and output
the sound from the current
source.
Back Camera To show the picture from
the back camera when the
back lamp lights up (or the
shift lever is set to the R
(reverse) position).
PAL (z)
To set to PAL.
NTSC To set to NTSC.
– –
Unit off.
Unit status
Any status.
45