Multi-Channel Output Of 2-Channel Sources; Optimizing Sound For The Listening Position - Intelligent Time Alignment - Sony XAV-W1 Mode D'emploi

Multi-channel output of
2-channel sources — Pro Logic II
Dolby Pro Logic II produces 5 full-bandwidth
output channels from 2-channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
The Pro Logic II mode options are indicated
below.
Music: Provides a deep, wide sound space to
stereo audio recordings.
Movie: Provides enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound to stereo television
shows and all programs encoded in Dolby
Surround.
1
During playback/reception, touch
"SETUP," then the "Sound" tab.
The "Sound Setting" display appears.
2
Touch "Dolby Pro Logic II."
The options appear.
3
Touch the desired option.
To deactivate the Pro Logic II mode, select
"OFF."
To return to the previous display, touch
To close the setup menu, touch "SETUP."
Notes
• This function is unavailable for Super Audio CD,
®
WMA, JPEG, DivX , or discs in Dolby Digital (other
than 2-channel) or DTS format.
• The Pro Logic II mode is not selectable while the
karaoke mode (page 26) or Zone × Zone (page 26)
is activated.
Optimizing sound for the
listening position
— Intelligent Time Alignment
The unit can change the localization of sound by
delaying the sound output from each speaker to
suit your position, and simulate a natural sound
field with the feeling of being in the center of it
wherever you sit in the car.
The options for "Listening Position" are
indicated below.
Front L (1): Front left
Front R (2): Front right
Front (3): Center front
All (4): In the center of your
car
Custom: Precisely calibrated
position (page 34)
1
During playback/reception, touch
"SETUP," then the "Sound" tab.
The "Sound Setting" display appears.
2
Touch "Listening Position."
The setting display appears.
.
3
Touch the desired option.
The setting is complete.
To cancel Intelligent Time Alignment, select
"OFF."
To return to the previous display, touch
To close the setup menu, touch "SETUP."
Note
Intelligent Time Alignment is not selectable while the
karaoke mode (page 26) or Zone × Zone (page 26) is
activated, or "Super Audio CD Mode" is set to "High
Quality" (page 28).
1 3 2
4
.
33