Capturing Images For Wallpaper; Selecting The Picture Quality - Picture Eq - Sony XAV-W1 Mode D'emploi

Capturing images for wallpaper

During video/image playback, you can capture
images and store them (up to 4 images) to set as
wallpaper. You can also capture an image from
an auxiliary video device, if connected.
1
Start playing the disc or auxiliary
video device.
2
Press (CAPTURE) on the card remote
commander at the desired scene/
image.
The confirmation display appears.
3
Touch "Yes" to store the image.
The image is stored on the unit.
Notes
• Do not turn off the unit while storing the image,
otherwise the image may not be stored.
• The stored image is limited to private use only. Use
for public and profit purposes require permission of
the copyright holders.
• Stored images may differ from the original aspect
ratio, or some characters may not be displayed
correctly due to compression or elongation.
Tip
If "Capture" is assigned to (CSTM) on the main unit,
press it to capture the image. For details on how to
assign the function on (CSTM), see page 44.
Deleting captured images
You can delete stored images.
1
Touch "SETUP," the "Screen" tab, then
"Wallpaper Delete."
2
Touch the image to delete, then
The selected image appears in the right of the
display for confirmation.
Repeat this step to delete other images.
3
Touch "OK."
CAPTURE
The confirmation display appears.
4
Touch "Yes."
The selected image(s) is deleted.
To return to the previous display, touch
To close the setup menu, touch "SETUP."
Selecting the picture quality
— Picture EQ
You can select a picture quality suitable for the
interior brightness of the car.
The options are indicated below.
Dynamic: Vivid picture with bright, clear
colors.
Theater: Brightens the monitor; suitable for
darkly-lit movies.
Sepia: Applies a sepia tone to the picture.
Standard: Standard picture quality.
Custom1, Custom2: User-adjustable settings
(page 38).
1
During video/image playback, touch
"SETUP," then the "Screen" tab.
The "Screen Setting 1" display appears.
2
Touch "Picture EQ."
The options appear.
3
Touch the desired option.
To return to the previous display, touch
To close the setup menu, touch "SETUP."
Tip
If "Picture EQ" is assigned to (CSTM) on the main
unit, press it repeatedly to switch the picture quality.
For details on how to assign the function on (CSTM),
see page 44.
.
.
.
37