Radio Operations; Listening To The Radio; Searching A Station Manually: Manual Search; Searching A Station Automatically: Auto Search - JVC KD-LH1101 Manuel D'instructions

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
FM1
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching a station.
To search stations of lower frequencies
When a station is received, searching stops.
10
Each time you press the
button, the band changes as
follows:
FM2 FM3 AM
To search stations of
higher frequencies
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM1 FM2
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢
until "Manual Search" starts flashing
on the display.
FM3 AM
or 4