Status Display - Loewe Audio AC3 Mode D'emploi

Operation with Dolby Digital Decoder

Status display

You will notice extensions to the sound identification in the status display
when the Dolby Digital Decoder has been installed.
➠ In normal TV mode, without other displays:
END: Show / hide status display.
1 Das Erste
14:30 - 15:15
Language-/sound selection
 14:42 Alarm time 20:00
You will see the sound identification among other things
on the top two lines.
Explanations of the symbols for sound identification:
Transmitted audio signal:
Mono
Mono audio transmission analogue.
2-sound
Two-sound transmission (Sound/Sound2) analogue.
Stereo
Stereo sound transmission analogue or digital (PCM).

Digital
Dolby Digital sound transmission (DD).
dts
dts sound transmission.
MPEG
MPEG sound transmission.

PLII
Dolby Pro Logic II sound transmission.
Transmitted audio channels:
 DD / dts .0 / mono
 DD / dts / MPEG 2.0
 DD / dts 3.0
 DD / dts 4.0
 DD / dts 5.0
 DD / dts 2.
 DD / dts 3.
 DD / dts 4.
 DD / dts 5.
Selected sound mode:
1 playback of center sound or mono (left/right).
2 playback of front sound (L/R stereo).
3 playback of front and center sound.
4 playback of front and surround sound.
5 playback of front, surround and center sound.
  Digital (5)
Toskana
Sleep timer 23:00
➠ If the number of speakers appears in brackets, the
sound of missing speakers is transmitted by the availa-
ble speakers (virtual). The Dolby Virtual Speaker (VS
mode) developed by Dolby is activated for the virtual
sound reproduction.
9 -