Calling The Sound Components Wizard; Sound Playback Via - Loewe Audio AC3 Mode D'emploi

Installation and connection
Connecting another loudspeaker system or
active speakers
If you want to use another comparable speaker system or active speakers,
you can connect these to the AUDIO LINK interface of the TV set by an
adapter cable. A comparable speaker system is connected in a similar
way to that described above for "subwoofer without AUDIO LINK
interface".
The adapter cable is available from your dealer.
AUDIO LINK adapter cable Loewe order no. 89954.00.
Connecting active speakers
Switch off all devices before connecting.
Plug the adapter cable to the AUDIO LINK interface of the TV set. Connect
the cinch connections of the adapter cable to the connections of the
corresponding speakers.
The cinch connections of the adapter cable are labelled:
R for Front right
L for Front left
C for Center
The connections on the adapter cable are preamplifier outputs. Therefore
only active speakers can be connected directly to the adapter cable.
Front
Left
Surround
Left
Adapter cable
Connection of active speakers to the TV set
SR for Surround right
SL for Surround left
SUB for Subwoofer
Center
Subwoofer
TV set
Standard settings
Setting the speaker system

Calling the sound components wizard

➠ In normal TV mode, without other displays.
Call TV menu.
34 Select Connections,
6 go to the menu line below.
34 Select Sound components,
OK calls the sound components wizard.
Sound playback via ... speaker system
Enter here that you want to hear the TV sound over a speaker system.
Front
Right
When you connect the active speakers, please also use the speaker
system setting.
6 Mark Speakers system,
OK to continue.
Surround
Right
If nothing has been set yet, the factory settings or
otherwise the last set values are displayed.
Sound components wizard
Please specify here via which sound components you want to listen to your
TV sound. If you select a "Speaker system", this must be connected to the
AUDIO LINK socket on the back of the TV set (with an additional adapter if
necessary).
If your TV has no built-in speakers, the sections relating to "TV speakers" may
not be selected.
Sound components

Sound playback via ...

TV speakers
Speakers system
HiFi/AV amplifier
Sound projector
HiFi/AV amplifier or TV speaker (switchable)
Sound projector or TV speakers (swichable)
Proceed
OK
Sound components wizard
Please specify whether you want to change the illustrated setting of your
speakers system or whether all existing settings are to be reset to the values
of the delivery state.
Components Distances
TV TV TV TV
4,0m 4,0m
Sound components
Speakers system
Configuration/modification Reset to factory settings
OK
Proceed
OK
continued on next page

OK
END
Level
TV TV
0dB 0dB
END
Ž
5 -