Breville Barista Express Manuel D'instructions page 32

PROBLEM
Pulsing/pumping sound
while extracting espresso
or steaming milk.
Water leaking.
Machine is on but
ceases to operate.
32
POSSIBLE CAUSES
•
The machine is carrying out the
normal operation of the 15 bar
Italian pump.
•
Water tank is empty.
•
Water tank is not fully inserted
and locked into position.
•
Auto purge feature. Immediately
after the espresso, hot water and
steam functions, the machine
will purge water into the drip
tray. This ensures the thermocoil
is at the optimal temperature.
•
Water tank is not fully inserted
and locked into position.
•
The silicone seal surrounding
the shower screen needs to be
replaced to ensure the portafilter
is properly secured into the
group head.
•
The safety thermal-cut out may
have activated due to the pump
or grinder overheating.
EASY SOLUTION
•
No action required as this is the
normal operation of the machine.
•
Fill tank.
•
Push water tank down completely to
lock into place.
•
Ensure the drip tray is firmly pushed
in place and emptied whenever the
Empty Me! indicator is displayed.
•
Push water tank down completely to
lock into place.
•
Refer to 'Using the Allen Key',
page 27.
•
Press the POWER button to switch
the machine off and unplug from the
power outlet. Allow to cool for about
30–60 minutes.
•
If problem persists, call Breville
Consumer Support.