Daily Use - Zanussi ZDT 16011 FA Notice D'utilisation

1
3
Put 1 litre of water in
the salt container (on-
ly for the first time).
5
Filling the rinse aid dispenser
Caution! Only use rinse aid for
dishwashers. Other products can cause
damage to the appliance.

Daily use

1. Open the water tap.
2. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
• If the salt indicator is on, fill the salt con-
tainer.
www.zanussi.com
2
4
6
The rinse aid, during the last rinsing phase,
helps to dry the dishes without streaks and
stains.
1
max
A
+ - -
3
To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).
• If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and soil.
Loading the baskets
2
4
21