Care And Cleaning - Zanussi ZDT 16011 FA Notice D'utilisation

2. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode.
3. Set the programme.
• The related programme indicator comes
on.
• The programme duration flashes in the
display.
4. Close the appliance door. The programme
starts.
• If you open the door, the display shows
the programme duration that decreases
with steps of 1 minute.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again until
the display shows the delay time you want
to set (from 1 to 24 hours).
• The delay time flashes in the display.
• The delay indicator is on.
3. Close the appliance door. The countdown
starts.
• If you open the door, the display shows
the countdown of the delay start that de-
creases with steps of 1 hours.
• When the countdown is completed, the pro-
gramme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the delay start while the
countdown operates
Press and hold function buttons (B) and (C) at
the same time until:

Care and cleaning

Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
www.zanussi.com
• All the programme indicators come on.
When you cancel a delay start, the appli-
ance goes back to setting mode. You have
to set the programme again.
Cancelling the programme
Press and hold function buttons (B) and (C) at
the same time until:
• All the programme indicators come on.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, an inter-
mittent acoustic signal operates and the display
shows 0.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
If you do not press the on/off button, the
AUTO OFF device automatically deacti-
vates the appliance after some minutes. This
helps to decrease the energy consumption.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
23