Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5
Filling the rinse aid dispenser
1

Daily use

1. Open the water tap.
2. Press the on/off button to activate the ap-
pliance. Make sure that the appliance is in
setting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
• If the salt indicator is on, fill the salt con-
tainer.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for
the type of load and soil.
www.zanussi.com
6
2
max
3
To adjust the released quantity of rinse aid,
turn the selector between position 1 (lowest
quantity) and position 4 (highest quantity).
Using the detergent
1
4
2
21

Publicité

Table des Matières
loading

Table des Matières