Publicité
Les langues disponibles
Les langues disponibles
ESPAÑOL
ENGLISH
WIrING aND DISpLaY EXaMpLES
t 5 6 8 a c a b l e w i t h a S h o r t a n d o p e n :
t 5 6 8 a c a b l e w i t h a M i s w i r e a n d
u n r e c o g n i z e d c o n t i n u i t y :
6
The 1-2 pair pins are shorted
together and the 7-8 pair is
open. The pins with the errors
are flashing. Dash lines (-) on
the bottom (remote) display
line indicate the short, while
no numbers on the bottom
line indicate the open pair.
t568a cable with a miswire and
unrecognized continuity: Pins 1 and
LAN Scout™ Jr.
2 on the
are connected to pins 2 and 1 at
the remote-end. The pins with this
error are flashing. The "U" for the
remote pin numbers indicates an
unrecognizable continuity was
detected that is neither a short
or open.
fLaSHING
BattErY rEpLacEMENt
1.
remove single screw in the middle of the back of the LAN Scout™ Jr.
with a #0 Phillips head screwdriver. Remove battery door.
2.
recycle exhausted batteries. Hitting the palm of your cupped hand
with the back of the LAN Scout™ Jr. will usually dislodge the batteries
from the compartment.
3.
acquire 4 x 1.5 alkaline batteries (IEC LR44, ANSI/NEDA 1166A).
4.
Insert batteries into battery compartment with the battery plus sign
(+) in the direction of the plus sign on the case (the spring contact is
negative and the button contact is positive). Inserting the last battery
in the middle of the stack is the easiest.
5.
replace battery door and screw, taking care not to over-tighten it.
WarraNtY
www.kleintools.com/warranty
Turn instrument off and disconnect any cables. Clean the instrument by
using a damp cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when instrument is not in use for a prolonged period
of time. Do not expose to high temperatures or humidity. After a period
of storage in extreme conditions exceeding the limits mentioned in the
Specifications section, allow the instrument to return to normal operating
conditions before using it.
DISpoSaL / rEcYcLE
Do not place equipment and its accessories in
the trash. Items must be properly disposed of in
accordance with local regulations.
Prior to disposal of this product, please contact
Klein Tools for proper disposal options.
cLEaNING
StoraGE
7
Publicité
