Peg-Perego VIAGGIO 2-3 Mode D'emploi page 26

ensuring that it clicks in place. Position
the two sections of the belt as shown
in the figure.
16• To complete the fixing, insert the
safety belt diagonally in the upper slot
above the child's shoulder.
IMPORTANT: if the belt is slack,
tension it. Verify that the belt is
always tensioned and untwisted.
17• The safety belts are correctly
positioned if the child's shoulders are
below the intersection point of the
safety belts, as shown in the figure.
IMPORTANT: the safety belts
should not be too above or below
the child's shoulders.
How to remove the lining
from the bag
When removing the lining of Viaggio
2/3, do NOT detach the three elements
- headrest, backrest, seat -
but keep them together.
REMOVE THE LINING FROM THE
SEAT:
18• Detach the small hooks of the seat
bag from the points and following the
sequence shown in the figure. Remove
the central belt.
19• Remove the rigid ties as shown in
the Figure.
REMOVE THE LINING FROM THE
BACKREST:
20• Remove the rear cover by pulling it
outwards as shown in the figure.
21• Remove all the elastic straps.
22• Remove the bag.
REMOVE THE LINING FROM THE
HEADREST:
23• Remove the cover from the rear
of the headrest by pulling it outwards
and releasing the two elastic bands as
shown in the figure.
24• Remove the bag.
Maintenance of the padding
Brush the fabric parts to remove dust.
• When washing, closely follow the
instructions stated on the label sewn
into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
How to reline the bag
RELINING THE SEAT:
• Insert the rigid ties in the fabric of
the seat, verifying that that the hooks
project.
• Fix the small hooks to the seat, starting
from the three more external, insert the
central belt into the slot, then fasten
the two most internal hooks.
• Fasten the side automatic buttons.
RELINING THE BACKREST:
25• Fit the bag in place, by inserting the
lower section of the fabric behind the
headrest, as shown in the figure.
26• Fasten all the elastic straps in place.
27• Fit the cover in place, starting with
the lower section and proceeding with
the upper section.
26
REL
• Fix
to t
• Fa
28•
plac
par
Ac
29•
trav
and
Se
30•
Viag
pro
seri
31•
2/3
on
Pr
• T
am
and
car
• It
par
• Cl
wit
solv
• B
dus
• Do
abs
oth
•
atm