Baier BDB 825 Mode D'emploi page 29

Contents
1 About this Instruction Manual ............ 30
1.1 Important information ............................. 30
1.2 Symbols used in the instruction manual 30
2 General safety instructions for
power tools ........................................... 30
2.1 Workplace safety .................................... 30
2.2 Electrical safety ...................................... 31
2.3 Safety of people ...................................... 31
2.4 Using and handling the power tool ......... 31
2.5 Service .................................................... 32
2.6 Machine-specific safety instructions ..... 32
2.6.1 Operating personnel requirements ........ 32
2.6.2 Safety instructions for all work ............... 32
2.6.3 Workplace safety .................................... 32
2.6.4 Electrical safety ...................................... 33
2.6.5 Safety of people ...................................... 33
2.6.6 Hazards when using and handling the
power tool ............................................... 34
2.6.7 Safety instructions for using long drill
bits .......................................................... 35
2.6.8 Hazards when using and handling the
drill stand ................................................ 35
2.6.9 Service / Maintenance / Repair .............. 36
2.6.10 Explanation of the pictograms on the
machine .................................................. 36
3 Technical Characteristics ................... 37
3.1 Technical specifications ......................... 37
3.2 EU Declaration of Conformity ................ 38
3.3 Machine characteristics ......................... 38
3.4 Machine parts and controls .................... 38
3.5 Intended use ........................................... 39
4 Before Starting Work ........................... 39
5 Operation and Control - Hand-
Held Operation ..................................... 41
5.1 Fitting or replacing the diamond drill bit . 41
5.2 Dry drilling ............................................... 41
5.2.1 Inserting the centring pin ........................ 41
5.2.2 Connect dust extractor to the
extraction tube ....................................... 41
5.2.3 Switching on the diamond drill and
drilling ..................................................... 41
5.2.4 Ending the drilling process ..................... 43
5.3 Wet drilling .............................................. 44
5.3.1 Connecting the water supply to the
BAIER wet adapter ................................ 44
5.3.2 Using the centring suction plate
(accessories) .......................................... 44
5.4 Switching on the diamond drill and
drilling .................................................... 44
5.4.1 Ending the drilling process ..................... 45
6 Cleaning ................................................. 46
7 Maintenance .......................................... 46
8 Handling Diamond Core Drill Bits ...... 46
9 Disposal ................................................. 47
10 Scope of Supply ................................... 47
11 Warranty ................................................ 48
Imprint
Version V03 / 2020-05
Copyright:
Maschinenfabrik
OTTO BAIER GmbH
Heckenwiesen 26
71679 Asperg
Germany
It is prohibited to forward or reproduce this
document or to exploit and disclose its contents,
unless expressly permitted. Any infringements will
result in liability to pay compensation for damages.
All rights reserved in case of patent, utility model or
design registration.
This instruction manual has been prepared with
the greatest possible care. Nonetheless, OTTO
BAIER GmbH does not accept any liability
whatsoever for possible errors in this instruction
manual and their consequences. Equally, no liability
whatsoever is accepted for direct or consequential
damage or losses resulting from improper use of the
machine.
The national health and safety regulations and the
requirements of this instruction manual are to be
observed when using the machine.
All product names and brand names used are the
property of the holder and are not explicitly marked
as such.
Subject to change without notice.
| 29 |