Home Theater - Denon DVD-1600 Mode D'emploi

Home Theater—Enjoying more powerful sound
This unit has built-in Dolby Digital and DTS decoders.
You can enjoy the powerful movie theater and hall-like sound available with Dolby Digital and DTS by connecting an amplifier with 5.1-channel
input terminals. You do not need to purchase separate Dolby Digital or DTS decoders.
Use analog connection to enjoy audio recorded with high sampling frequencies (over 48 kHz). To protect the rights of the producers of
this kind of material, this audio will be down-sampled to 48 kHz or 44.1 kHz if you use digital connection.
To enjoy 5.1-channel surround sound
Analog connection
Connect an amplifier with 5.1-channel audio input terminals.
Change "Speaker setting" (
DIGITAL OUT
( PCM/BITSTREAM )
OPTICAL
White Red
CENTER SUB-
WOOFER
Note
≥Turn speaker and headphone V.S.S. (
connect through the 5.1-channel output terminals. The unit does
not output the signals for channels other than the front speakers
when V.S.S. is on.
≥If you do not connect a subwoofer, it is advisable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
16
page 19).
5 1ch 2ch
AUD O OUT AUD O OUT
CENTER SURROUND FRONT
VIDEO S V DEO
L L L
OUT OUT
SUB
R
WOOFER
Back of the unit
White Red Red White
Audio cable
Connect cables to terminals
corresponding to the
speakers you have
connected.
SURROUND FRONT
(L) (R) (R) (L)
Amplifier
Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
page 10) off when you
Digital connection
Connect an amplifier with a built-in decoder or a decoder-amplifier
combination.
Change "Digital output" ( page 20).
5 1ch
AUD O OUT
CENTER SURROUND
L
DIGITAL OUT
( PCM/BITSTREAM )
OPTICAL
SUB
R
WOOFER
Optical digital audio cable
Do not bend when connecting.
OPTICAL
Note
You cannot use DTS Digital Surround decoders not suited to DVD-
Video.
2ch
AUD O OUT
FRONT
VIDEO S VIDEO
L L
OUT OUT
R R
Back of the unit
Insert fully,
with this side
facing up.