Hilti TE 60-AVR Mode D'emploi Original page 15

Ø Breach bits
Ø Percussion core bits
Ø PCM diamond core bits
Ø Drill bits for metal
Ø Drill bits for wood
Chuck
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and
into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
5.1.2 Fitting the depth gauge (optional)
1. Release the side handle clamping band by turning the handle grip.
2. Slide the depth gauge from the front into the 2 guide holes provided.
3. Tighten the side handle clamping band by turning the handle grip.
*2134961*
TE 60­AVR
1 9/16 in ... 3 1/8 in
(39.7 mm ...
79.4 mm)
1 3/4 in ... 4 in
(44.4 mm ...
100 mm)
•/•
0 in ... 1/2 in
(0 mm ... 13 mm)
13/32 in ... 1 1/4 in
(10.3 mm ...
31.8 mm)
TE­Y
3
2134961
TE 60-ATC/AVR
1 9/16 in ... 3 1/8 in
(39.7 mm ...
79.4 mm)
1 3/4 in ... 4 in
(44.4 mm ...
100 mm)
1 1/2 in ... 4 in
(38 mm ... 100 mm)
0 in ... 1/2 in
(0 mm ... 13 mm)
13/32 in ... 1 1/4 in
(10.3 mm ...
31.8 mm)
TE­Y
4
English 9