Appendix A: Guidance And Manufacturer's Declaration; For Emc - Haag-Streit LI 900 Mode D'emploi

Appendix A
Guidance and manufacturer's
declaration for electromagnetic compa-
tibility (EMC)
General
• Electrical medical appliances and
systems are subject to special
measures regarding EMC and should
be installed in accordance with these
accompanying instructions.
• Portable and mobile high frequency
communications equipment can
negatively influence electrical medi-
cal appliances.
System Components:
The Slit Lamp with LED Illumination System includes the
following equipment:
• Slit Lamp BQ 900 , BM 900 or BP 900
® ®
• LED Illumination LI 900
®
• Power Supply Unit PS-LED HSM 901
Connecting Cables
The following connecting cables are required:
• Power Supply Unit CH: maximum length = 2500 mm
• Power Supply Unit USA: maximum length = 3100 mm
• Any connecting cables or accesso-
ries used to run the appliance other
than those indicated can lead to in-
creased emissions or to a reduced
interference factor in the Slit Lamp
with LED Illumination System.
Main features of performance:
The Slit Lamp with LED Illumination System serves to ex-
amine and diagnose the human eye. This is achieved by
projecting onto the eye a very narrow beam of light, which
can be adjusted to vary its length and width.
Guidelines and Manufacturer's Declaration on Electro-
magnetic Emissions
The Slit Lamp with LED Illumination System is intended for
use in the following type of environment.
The customer or user of the Slit Lamp with LED Illumination
System should ensure that it is only operated in such an
environment. - See page 36.
®
1500 7220243.04000
900
BQ ®
900
BM ®
900
BP ®
© Haag-Streit AG, 3098 Koeniz, Switzerland