Publicité
EN
FR
DE
ES
Recharge only with the charger specified by the
n
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
n
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
n
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
Under abusive conditions, liquid may be ejected from
n
the battery; avoid contact. If contact accidentally
occurs, flush with plenty of soap and water. If liquid
contacts eyes, immediately seek medical help. Liquid
ejected from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair
n
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
HEDGE TRIMMER SAFETY WARNINGS
Keep all parts of the body away from the cutter blade.
n
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material.A moment of
inattention while operating the hedge trimmer may
result in serious personal injury.
Carry the hedge trimmer by the handle with the
n
cutter blade stopped. When transporting or storing
the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
Hold the power tool by insulated gripping surfaces
n
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
READ ALL INSTRUCTIONS BEFORE OPERATING
Read the instructions carefully. Be familiar with the
n
controls and proper use of the unit.
Do not operate this unit when tired, ill, or under the
n
influence of alcohol, drugs, or medication.
Inspect the unit before use. Replace damaged parts.
n
Check for battery pack leaks.
Make sure all fasteners and guards are in place and
n
IT
PT
NL
SV
DA
English (original instructions)
NO
FI
HU CS RU
secure. Replace cutting blades or any other parts
that are cracked, chipped, or damaged. Make sure
the cutting blade is properly installed and securely
fastened. Failure to do so can result in personal injury
to the operator and bystanders, as well as damage to
the unit.
Use the right tool. Only use this hedge trimmer for the
n
purpose intended.
Do not use hedge trimmer if switch will not turn the
n
unit on or off. A unit that cannot be controlled with the
switch is dangerous and must be repaired.
Clear the area to be cut before each use. Remove all
n
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade.
Clear the area of children, bystanders, and pets.
n
At a minimum, keep all children, bystanders and
pets outside a 15 m radius; there still may be a
risk to bystanders from thrown objects. If you are
approached, stop the unit immediately.
Do not operate power tools in explosive atmospheres,
n
such as in the presence of fl ammable liquids, gases
or dust. Power tools create sparks which may ignite
the dust or fumes.
To avoid the risk of electric shock, do not operate unit
n
in damp or wet locations.
Do not handle the unit with wet hands.
n
Do not allow children or untrained individuals to use
n
this hedge trimmer.
To reduce the risk of injury, always wear full eye
n
protection, footwear, goggles and clothing when using
this machine.
Wear a face or dust mask if the operation is dusty.
n
Dress properly. Do not wear loose clothing or
n
jewellery; they can be caught in moving parts. Use of
rubber gloves, substantial footwear and long trousers
is recommended when working outdoors.
To prevent hair from being drawn into nearby air
n
vents and becoming entangled in moving parts,
wear protective hair covering to contain long hair or
secure covered hair above shoulder level.
When transporting or storing the machine always fit
n
with blade cover.
Always be aware of your surroundings and stay alert
n
for possible hazards that you may not hear due to the
noise of the machine.
Form the habit of checking to see that keys and
n
adjusting wrenches are removed from the tool before
turning it on.
Always ensure all the handles and guards are fitted
n
when using the tool.
Never attempt to use an incomplete machine or one
n
fitted whith an unauthorised modification.
11
RO PL
SL
HR ET
LT
LV
SK BG
Publicité
